Cisco 300-365 Question Answer

A customer requires wireless traffic from the branch to be routed through the firewall at corporate headquarters. There is a RADIUS server in each branch location. Which FlexConnect state should be used in this scenario?

A. local authentication and local switching
B. local authentication and central switching
C. central authentication and central switching
D. central authentication and local switching

Answer: C

Cisco 300-365 Question Answer

Which show command will show whether a WLAN is locally or centrally switched on a Cisco Wireless Lan Controller?

A. show ap config general Cisco_AP
B. show wlan wlan_id
C. show flexconnect summary
D. show flexconnect group detail

Answer: B 


A network engineer is experiencing issues enabling LAG on the WLC. Which four characteristics should be validated to ensure LAG configuration? (Choose four.)

A. Аll ports participate in the LAG by default when LAG is enabled on the controller. y
B. Dynamic interfaces and management are moved to port 1
C. Primary and secondary ports are needed for each interface.
D. Multiple untagged interfaces to the same port are not allowed.
E. EtherChannel must be configured for mode “on” on the switch.
F. Only one functional physical port is needed to continue to pass traffic.
G. Multiple LAGs are permitted on the controller.
H. The WLC does not need to be rebooted to enable the LAG configuration.

Answer: ADEF